![]() |
|
QJ8 EX (EP-8v2 EX) Recommended ESC's |
|
|
|
|
Simple 4 color LED Programming |
|
| Specifications: PCB-52-J | |
| Cells | 2-5 cells Li-poly, Ni-cad 6-10 cells |
| Brake | Yes |
| Timing Advance | Automatic |
| Max. Amp. | 50A |
| BEC | Yes |
| Pinion Gear | Recommended pinion with one 4 cell Li-poly battery 21 Tooth |
| Retail | $90.00 |
|
|
Quark 65A ESC |
|
Simple 4 color LED Programming |
| Specifications: | |
| Programmable Modes (7) | Air, Air 3-D, Car/boat & rev., Heli 1, Heli 2, Heli 3 |
| Program Options | Easy or Advanced |
| Timing Advance | Automatic |
| Brake Selection | Realistic ABS |
| Switching Rate | 38KHz |
| Turbo | On/Off Automatic with 100% throttle |
| Low Voltage Cut-off Battery Selection | Automatic Voltage Cutoff (Programmable) |
| Motor Type Selection | Inrunner or Outrunner |
| High Temp Cut/off | Automatic |
| Race/Safe Mode | In Safe mode Fail-Safe can occur |
| Governor | One/two RPM |
| Torque Selection | Soft, Normal, Dynamic |
| Neutral Range Selection | Throttle Response |
| BEC | Smart BEC Cutoff |
| Operating Amperes | 65Amp continuous/150amp surge @ 10 sec. |
| Cells | 2 to 6 cells Li-poly |
| Super-Low Resistance | 0.00073 |
| Retail | $180.00 HH $150.00 |
|
|
Castle Creations PH80 |
|
Phoenix PH80 Brushless Controller |
|
| Specifications: | |
| Operating Current | 80A |
| Cells | Up to 36 cells or 12 Lithium Polymer |
| Min. Cells | 16 cells or 3s Lipo |
| Low Resistance | .003 ohms |
| Over-temp | Motor cutoff w/reset |
| Safe "power on" arming program | Ensures motor will not accidentally turn on |
| Soft Start | Low Torque |
| Motor & Battery Wires | 13 gauge |
| Shutdown | Auto with loss of signal or radio interference |
| Low-voltage | Cutoff with Auto-Lipo detect |
| Protection | Over-current |
| Throttle Range | fixed/self-adjusting/governor |
| Soft Start | Ramp up |
| Switching Freq | Programmable |
| Cutoff Type | Programmable |
| Timing Advance | Programmable |
| Brake Type | Programmable |
| Size | 1.05 x 2.6 x .5" |
| Weight | 1.9oz.(59g) |
| Price | Call |
|
|
Castle Creations HV45 |
|
Phoenix HV 45 Brushless Controller |
| Specifications: | |
| Operating Current | 45A |
| Cells | Up to 36 cells or 12 Lithium Polymer |
| Min. Cells | 16 cells or 3s Lipo |
| Low Resistance | .003 ohms |
| Over-temp | Motor cutoff w/reset |
| Safe "power on" arming program | Ensures motor will not accidentally turn on |
| Soft Start | Low Torque |
| Motor & Battery Wires | 13 gauge |
| Shutdown | Auto with loss of signal or radio interference |
| Low-voltage | Cutoff with Auto-Lipo detect |
| Protection | Over-current |
| Throttle Range | fixed/self-adjusting/governor |
| Soft Start | Ramp up |
| Switching Freq | Programmable |
| Cutoff Type | Programmable |
| Timing Advance | Programmable |
| Brake Type | Programmable |
| Size | 1.05 x 2.6 x .5" |
| Weight | 1.9oz.(59g) |
| Price | Call |
|
|
Hacker Brushless Master 40-O-Heli |
|
Sensorless Speed Controller w/special programming options for best power and performance. |
| Specifications: | |
| Current | 40 Amps |
| Current | 40/60 Amps |
| Cells | 7-10 NIMH/ 2-5 Li-poly |
| Size | 2.1 x 1 x .5 inches |
| Weight | 1.4 oz. |
| Soft Start | Special System |
| Modes | Governor or Normal |
| Programming | Master Prog-Box Required $40 |
| Timing | Adjustable 0-30 degrees |
| Retail | $139.99 |
|
|
Hacker Master 48-O-Heli |
|
Sensorless Speed Controller w/special programming options for best power and performance. |
|
| Specifications: | |
| Current | 48 Amps |
| Current | 48/72 Amps |
| Cells | 10-32 NIMH/ 4-10 Li-poly |
| Size | 2.1 x 1 x .5 inches |
| Weight | 1.4 oz. |
| Soft Start | Special System |
| Modes | Governor or Normal |
| Programming | Master Prog-Box Required $40 |
| Timing | Adjustable 0-30 degrees |
| Retail | $199.99 |
|
|
Castle Creations HV85 |
|
Phoenix HV 85 Brushless Controller |
|
| Specifications: | |
| Operating Current | 85A |
| Cells | Up to 36 cells or 12 Lithium Polymer |
| Min. Cells | 16 cells or 3s Lipo |
| Low Resistance | .0015 ohms |
| Over-temp | Motor cutoff w/reset |
| Safe "power on" arming program | Ensures motor will not accidentally turn on |
| Soft Start | Low Torque |
| Motor & Battery Wires | 13 gauge |
| Shutdown | Auto with loss of signal or radio interference |
| Low-voltage | Cutoff with Auto-Lipo detect |
| Protection | Over-current |
| Throttle Range | fixed/self-adjusting/governor |
| Soft Start | Ramp up |
| Switching Freq | Programmable |
| Cutoff Type | Programmable |
| Timing Advance | Programmable |
| Brake Type | Programmable |
| Size | 1.55 x 2.8 1.0" |
| Weight | 4.2 oz.(119g) |
| Retail | $189.99 |
|
Paragraph |
|
|
Attention Customers: We can help on shipping out of the USA if you purchase additional accessories for your heli from us at the time of purchase. We carry various brands of motors, ESC, BEC, Servos, etc. for our helis. |
|