QJ8 (EP-8v2 EX) Kit Features page Quick of Japan Helicopters.

This Kit has all the upgrades for  HARD 3-D!    

      QJ-8 (EP-8v2 EX)  Kit Features

       

  

This QJ8 newest release from Quick of Japan has the heavy duty parts for hard 3-D flight maneuvers.

This kit was developed for the pilot that wants higher head speed for the upper level performance. The Li-poly 4 to 9 cell batteries will be used on this heli. The new designed head, main shaft, and etc. were developed over the past year by Quick of Japan will give the smooth control with the standard quality flying characteristics of the EP-8. 

The QJ-8 main frame uses micro servos such as the Quick BMS280MG, Hitec HS-81, Hitec HS-85, HS-81MG, HS-85BB, HS-85BBMG, the Futaba 3101, or the  JR341. Digital servos enhance the performance of this helicopter.

Can be purchased w/all equipment, just add your rec. and gyro, "See Combo Page".

THIS NEW UPGRADED KIT INCLUDES! ) EP8 EX version (See 12 listed upgrades below)

It has following specs( compared to EP8v2 kit ),  Direct from Quick of Japan:

1.tail shaft ( 4.0mm to 5.0mm )
2.tail grip bearing( 1pc to 2 pcs)
3.tail pc lever ( bigger 2 bearings)
4.main frames( 1.5mm to 2.0mm )
5.rudder servo ( mini size to standard size )
6.oneway bearing ( bigger size )
7.main shaft ( 6.0mm to 8.0mm )
8.swash bearing( 1pc to 2 pcs)
9.washout arm ( strong type same as 30 class)
10.main grip ( 2 radial bearings to 2 radial bearings with 1 thrust )
11.stabilizer bar ( 270 mm to 325 mm for 3D )
12.silver color to anodized blue color (standard )
 

 
Specifications:
Manufacturer:         Quick of Japan
Pinion Gear Customer must purchase pinion gear for his motor needs.
Parts:  Japanese High Quality machined parts   Anodized Blue
Bearings:  High Quality Japanese Bearings
Ease of Building: Design reflects the other metal Fighter Kits with most bearings pre-installed
Head:  Metal Hub single spindle with larger blade grips
Blade Grips:  Metal  Anodized Blue
Pitch Arms: Metal  Anodized Blue
Washout Unit Arms: Metal  Anodized Blue
Swashplate:  Metal  New double ball bearing for improved performance.  Anodized Blue
Main Shaft: Larger 8mm main shaft for higher head speed.
Bearing Blocks:  Metal  Anodized Blue or Black
Flybar: Longer 325mm Fly Bar for more cyclic control.
Flybar Control Arms: Metal 
Tail Boom Length: 445mm   Anodized Blue or Black
Ready To Fly Weight:  1 to 1.2 kg
Tail Rotor:    Belt driven
Tail Rotor Blades: Plastic
Main Rotor Disc Dia.: Approx. 3 Feet or 36 inches
Frames:   New 2.0mm frames, rigid aluminum to handle the horsepower!   Anodized Blue or Black
Fins: Plastic, new mounts
Canopys:   Clear polycarbonate unpainted canopy 
Tail PC Lever 2 bigger bearings (no slop)
One way bearing Larger bearing
Tail Rotor Servo Size Standard Size Servo
Tail Rotor Output Shaft Increased to 5.0 mm
Tail Blade Grips Increased to 2 bearings
Main Frames Increased to 2.0mm thickness
Washout arms Stronger as on the 30 class heli
Main Blade Grips Two radial bearings with an added thrust bearing
Length 795mm  ( approx. 33 inches long)
Total Height 278mm  ( approx. 11 inches height)
Tail Rotor Dia. 177mm  ( approx. 3 feet)
Main Rotor Blades 400mm Wood Rotor Blades from Japan
   

Attention  Customers:  We can help on shipping out of the USA if you purchase additional accessories for your heli from us at the time of purchase.  We carry various brands of motors, ESC, BEC, Servos, etc. for our helis.