QJ8 (EP-8v2 EX) Options
MS-10420/3 GFC 420mm Main Blades Rotor Blades
by MS Composit $65.00
Fly Bar Lock Setup Tool for the SP and Ex
$15.00
This new tool helps the pilot set the pitch to the
exact
measurements. It is hard to duplicate a setup without
using this tool because the flybar is so short it changes
angles very quickly. With this tool, the heli does not have
to be on a perfectly level table to get accurate readings,
without it, it needs to be on a perfectly level surface for setup!!
Swash Plate Leveling-Setup Tool for the SP and EX. All the links
$15.00
on the head can be made and adjusted with the tool under the swash
without the servo linkages hooked up to the swash. Just put the
washout
links on the swash L4 pivot balls and then put the linkages on to make the
linkages square or level. You can leave the fly bar arms just barely
tightened
till you get all the links hooked to the mixing base on the pitch arms.
We will
have a step by step procedure for new pilots soon. Saves time and
less work
when building!!
Heavy Duty Skid Set for EP8v2 SP and EX for
heavier battery weight.
Use this set of skids for the heavier batteries!! $28.99
MS Composit
Carbon Fiber Rotor blades have proven to give good performance on the Quick
helis. Many customers have purchased these blades for the EP8v2 SP and EX.
These are the CF MS Composit 80mm5/3 blades. Caution: These blades must be cut
off to run them with the 420mm Main Rotor Blades!! $19.50
Viper EX , G10 Frames $35.00. Longer battery Lo rails $15.00.
Frame & Lo Rails $45.00
The weight difference in these parts increases 3-D performance. The HeCell
5 Cell 2100mah and the 3000mah 6 cell battery is now available for this
ultimate 3-D
machine!
420mm MS-20420 CFC Carbon Fiber MS Composit . $71.99
Showstopper runs the 420mm blades on his EX with a stock tailboom.
New! Viper G10 Fiberglass Fames and Battery Tray, strong and
lightweight!
$44.99
New! Viper G10 Fiberglass Battery Tray, longer and
strong, same as in above picture.
$15.00
QEP08-OH-7C Rigid Damper Spacers for the
EP8v2 EX.
$5.25
QEP08-OF-2C Frame Strengthening Cross Members for the SP and the
EX versions. $3.25
EP8v2-OF-6
Rudder Tail Boom Servo Mount
Retail$21.99
MPF-01-C Metal Fan for Hacker A30 series
outrunners. $13.99
QL30SPH6-4 Fly Bar Paddles $11.50
Fiberglass Gel Coated Canopy
$35.99
Air Brushed Canopys for Sale, prices and colors upon
customer request.
400mm Carbon Fiber Main Rotor Blades.
$65.00
NEW! EX G10 Fiberglass Frames and
Battery Tray, sold separate. One (1) frame
shown in picture. FG frames are 49.74 grams lighter than stock frames,
more than the
wt. of one stock frame! Frames $44.99 Lo Rail $8.99.
For wt. comparison click on
the picture.
1 S BLK-M/R G10 Fiberglass Main Frames. (Black
only) $35.99
Lo Rails G10 Fiberglass Battery Tray.
$8.99
HBA-09-C Counter Gear 24 T
(1:5).
$9.99
Decals, Canopy (QJ8 High Quality Vinyl)
Available in blue, black,
red, green, white, and yellow. $1.99
Decals, The ( QJ ) or the ( HH ) are
available in blue, black,
red, green, white, and yellow. $0.25
each
Hacker A30 Series Plastic Motor
Fan
$7.14
EP8V2-OT-3 Special Long Tail Conversion
Set. This set contains the long tail boom, tail rod,
$54.99
tail rod guide pipe, tail rod guide w/bushings, 2 tail rod connect ends,
tail belt, 5mm tail rotor output shaft,
set screw, tail pulley, tail pulley washer.
QEP08-OH-3C Hiller Control Arms Retail $21.99 Special $19.99
QEP08-OH-2C Mixing Levers for Larger Pitch w/bearings, spacers, and bolts. $ 24.99 Special $21.99