|
|
QJ8 (EP-8v2 SP) Options |
|
|
MS-10420/3 GFC 420mm Main Blades Rotor Blades
by MS Composit $65.00
Special $60.00
|
|
|
Fly Bar Lock Setup Tool for the SP and Ex $17.00
This new tool helps the pilot set the pitch to the
exact
measurements. It is hard to duplicate a setup without
using this tool because the flybar is so short it changes
angles very quickly. With this tool, the heli does not have
to be on a perfectly level table to get accurate readings,
without it, it needs to be on a perfectly level surface for setup!!
|
|
|
Swash Plate Leveling-Setup Tool for the SP and EX $15.00
|
|
|
Heavy Duty New Skid Set for EP8v2 SP and EX
for heavy battery weights
$25.00
|
|
|
MS Composit
Carbon Fiber Rotor blades have proven to give good performance on the Quick
helis. Many customers have purchased these blades for the EP8v2 SP and EX.
These are the CF MS Composit 80mm5/3 blades. Caution: These blades must be cut
off to run them with the 420mm Main Rotor Blades!! $19.50
|
|
|
MS Composit 420mm Main Rotor blades for the EP8v2
SP with a stock tail
$69.99 Special $65.00
boom.
|
|
|
QEP08-OF-2C Frame Strengthening Cross Members for the SP and the
EX versions. $3.25
|
|
|
* HBA-06-C 2.0mm Frame Set, complete
with one piece motor, main shaft mount. The one piece mount resists
frame twist of the more powerful motors. Comes w/shaft bearing.
$69.99
|
|
|
* HBA-04-C 5mm Tail Shaft Unit, complete tail boom
set. Larger tail rotor shaft bearings and heavy duty tail rotor plates.
$117.00
|
|
|
EP8v2-OF-6
Rudder Tail Boom Servo Mount
Retail$21.99
|
|
|
EP8v2-45a-1 325mm Fly
Bar. $6.00
|
|
|
HBB-04-E Long Main Shaft. $6.25
|
|
|
HBP-32-C Typhoon Motor Mount.
$9.99
|
|
|
EP8v2-23-1 Motor mount (Japanese) for
inrunners. $9.99
|
|
|
MPF-01-C Metal Fan for Hacker A30 series
outrunners. $13.99
|
|
|
HBA-12-C Swash Plate silver (double bearing) EX
$34.99
HBA-13-C Swash Plate
blue (double bearing)
|
|
|
QL30SPH6-4 Fly Bar Paddles $11.50
|
|
|
Fiberglass Gel Coated Canopy
$35.99
|
|
 |
Air Brushed Canopys for Sale, prices and colors upon
customer request.
|
|
|
400mm Carbon Fiber Main Rotor Blades. $65.00
|
|
|
385mm Carbon Fiber Main Rotor Blades by MAH & KSP. $60.00
|
|
|
3 Stock BLK-M G10 Fiberglass
Main Frames. $35.99
|
|
|
1 S BLK-M/R G10 Fiberglass Main Frames. (Black
only) $35.99
|
|
|
Lo Rails G10 Fiberglass Battery Tray. $8.50
|
|
|
G10 Fiberglass Tail Rotor Bearing Plates. $3.99
|
|
|
HBA-09-C Counter Gear 24 T
(1:5). $9.99
|
|
|
Decals, The ( QJ ) or the ( HH ) are
available in blue, black,
red, green, white, and yellow. $0.25
each
|
|
|
Decals, Canopy (QJ8 High Quality Vinyl)
Available in blue, black,
red, green, white, and yellow. $1.99
|
|
|
Hacker A30 Series Plastic Motor
Fan $7.14
|
|
|
EP8V2-OT-2a Special Long Tail Conversion Tail
Boom Note: This Boom fits only the SP with
a 4mm tail rotor output shaft. (In stock now) $16.80
|
|
|
Long tail belt for the above tail boom for the
EP8v2
SP
$17.99
|
|
|
EP8v2-OH-3 Hiller Control Arm
Retail $20.99 Special $18.99
|
|
|
QEP08-OH-2C Mixing Levers for Larger Pitch w/bearings, spacers,
and bolts. $ 24.99
Special $20.99
|
|
|
|
|
|